Skip to content
We Are Motor
Blog October 6, 2026 6 min read

Moto3, Moto2 and MotoGP: how the three classes really differ

The three classes are always described by engine capacity, and that is the least interesting difference. What really matters is how much of the bike the team gets to choose: in Moto2 the engine is identical for all thirty riders, and in MotoGP no two bikes are the same.

Moto de MotoGP inclinada en una curva de circuito

Written by Andrés Rendón

Founder and host of Somos Motor, October 6, 2026

The three classes are almost always explained by engine capacity: 250, 765 and 1,000 cubic centimetres. And that is, by some distance, the least interesting of their differences.

The one that really changes what you see on a Sunday is another: how much of the bike the team gets to choose. In Moto2, the engine is exactly the same for every rider on the grid. In MotoGP, no two bikes are alike and none of them can be bought. Winning means different things in each.

01The table, to get your bearings

Moto3Moto2MotoGP
Engine capacity250 cc765 ccUp to 1,000 cc
Cylinders13Maximum 4
EngineManufacturer's ownTriumph, single supplierEach maker's own prototype
ChassisManufacturer's ownFreeOwn prototype
Minimum weight152 kg, bike and rider217 kg, bike and rider157 kg, bike only

That last row is the one least talked about and the one with the most consequences. We will come back to it at the end, because it deserves its own section.

02Moto3: one cylinder and plenty of craft

A single-cylinder, four-stroke 250 cc. On paper, the most modest bike in the championship; in practice, the class that produces the closest racing of the weekend.

The reason is arithmetic. With modest power, the gap between riding alone and riding in a group is enormous: in the slipstream you gain far more than you lose by being behind. That is why Moto3 produces those twelve-bike packs arriving together at the last lap, and those on-the-limit moves that sometimes end in a penalty. It isn't that the riders are more aggressive by temperament: the technical rules reward sticking close.

It is also the gateway to the world championship, and the class where you can tell sooner than anywhere else whether a young rider can read a race.

03Moto2: the same engine for everyone

Here is the feature that defines the class most. Moto2 has a single engine supplier: since 2019 it has been Triumph, with a 765 cc three-cylinder derived from the road-going Street Triple RS, which replaced the 600 cc inline-four that Honda used to supply.

An identical engine across the whole grid changes the rules of the game. If your rival passes you on the straight, it can't be because he has more engine. That leaves only three explanations: he got a better exit from the previous corner, his chassis works better there, or he braked later.

The chassis, on the other hand, is free, and that is where manufacturers such as Kalex, Boscoscuro or Forward compete. That combination of a closed engine and an open chassis makes Moto2 the best shop window in the championship for judging a rider: it is as close as motorcycle racing gets to a one-make class without quite being one.

MotoGP bike leaning through a corner on a racing circuit
Imagen: Pixabay.

04MotoGP: prototypes that are never sold

The premier class allows up to 1,000 cc, with a maximum of four cylinders and a piston diameter limited to 81 millimetres. That last figure sounds like a technicality and is actually a safety decision: limiting the bore limits the revs the engine can work at, and with them the maximum power.

What matters most in MotoGP isn't in those figures but in one word: prototype. Each bike is a machine built by its manufacturer to race, not derived from any road model, and not on sale. It isn't that it is expensive: it can't be bought, because the rules are built on that premise.

That is also what sets MotoGP apart from the other great world championship for bikes, World Superbike, where the racing is on production-derived machines. The full comparison between the two is in MotoGP or Superbikes: how they really differ.

And the headline figure: the class's top speed record stands at 368.6 km/h, set by Jorge Martín on the Aprilia in the second free practice session of the Italian Grand Prix at Mugello in May 2026. He beat the 366.1 km/h that Brad Binder had recorded on the KTM at the same track, which is where these records always fall because of the length of its straight.

MotoGP bike leaning through a corner on a racing circuit
Imagen: Pixabay.

05The difference nobody talks about: how they are weighed

Let's go back to the last row of the table, because it explains an injustice that riders themselves have been pointing out for years.

In Moto3 and Moto2 the minimum weight is combined: bike and rider count together, 152 and 217 kilos respectively. If the rider is light, the team has to add ballast up to the minimum. The result: being light gives no advantage.

In MotoGP the minimum applies to the bike alone, 157 kilos, and the rider's weight does not enter the sum. The result: a tall, heavily built rider carries his extra kilos for the whole race, with no possible compensation.

Luca Marini, who is 1.84 m tall and weighs 69 kilos, summed it up bluntly to Crash.net: “It is impossible that they haven't brought this to MotoGP before” and “why should a heavy rider be penalised for something that is simply his nature?” His technical argument is that the extra weight costs not only acceleration but rubber: “with more kilos you need to put more energy into the tyre to accelerate the same way”. And he pointed to where the logjam is: in his view the initiative should come from IRTA and Dorna, not the manufacturers, because they are the ones who don't want to add ballast to their bikes.

At the other extreme, the 2022 Moto2 champion, Augusto Fernández, said that in that class “sometimes my dinners weren't enough” to make the weight. Two opposite problems that stem from the same line of the rulebook.

06What comes in 2027

The premier class is about to change from top to bottom: the 2027 rules cut capacity from 1,000 to 850 cc, trim the aerodynamics and eliminate the ride-height devices. What that means for the spectacle and for the teams is covered in MotoGP 2027: the 850 cc engine that changes everything.

And if what you are missing are the words you hear on the broadcast that nobody explains, there is the MotoGP glossary; how the championship works, with its points and weekend format, is in how MotoGP works. With those two pieces and this table, a race Sunday looks quite different.

Frequently asked questions

What engine capacity does each class have?

Moto3 uses single-cylinder, four-stroke 250 cc engines. Moto2 uses a 765 cc three-cylinder engine supplied by Triumph since 2019. MotoGP allows a maximum of 1,000 cc, with a limit of four cylinders and a maximum piston diameter of 81 millimetres.

Why do all Moto2 bikes use the same engine?

Because the class was designed with a single engine supplier so that the chassis, the set-up and the rider make the difference, and to keep costs down. Triumph replaced Honda as sole supplier in 2019, moving from the 600 cc inline-four to the 765 cc three-cylinder.

What is the minimum weight in each class?

In Moto3 and Moto2 the minimum weight is combined, bike plus rider: 152 kg in Moto3 and 217 kg in Moto2. In MotoGP the minimum applies to the bike alone, at 157 kg, and the rider's weight does not count.

What is the top speed record in MotoGP?

368.6 km/h, set by Jorge Martín on the Aprilia in the second free practice session of the Italian Grand Prix at Mugello in May 2026. It beat the 366.1 km/h Brad Binder had recorded on the KTM at the same circuit.

Email alerts

We will alert you about this section

We will alert you about all sections Change

Sections

Turn on notifications

The day before, the time of every session and where to watch it.