Skip to content
We Are Motor
News November 7, 2026 3 min read

KTM 450 SX-F Factory Edition 2027: 63.8 hp, 105.6 kg and, at last, no air fork

KTM debuts the 2027 SX-F Factory Editions at EICMA: the 250 with a new engine and the 450 with 63.8 hp, 105.6 kg and a WP XACT spring fork instead of air.

KTM 450 SX-F Factory Edition 2027 sobre un caballete naranja con montañas al fondo

Written by Andrés Rendón

Founder and host of Somos Motor, November 7, 2026

At EICMA 2026 KTM presented the 2027 250 SX-F and 450 SX-F Factory Edition, limited-run motocross bikes that, according to the show coverage, point to what the standard 2028 SX-Fs will be. The most talked-about change: the fork changes from air to spring.

01What changes

The chassis is new, lighter and with new geometry; the press describes it as chromoly steel, a material KTM does not specify in its release. The engine sits 2.3 mm higher in the frame, the aluminium subframe weighs 1.23 kg and the swingarm is cast aluminium. The fork is a 48 mm WP XACT closed-cartridge unit with a mechanical spring, replacing the previous air one. A spring gives a more predictable response that is less sensitive to temperature than air, like the difference between a sprung mattress and an inflatable one. The shock has a new high-speed compression adjuster and the linkage is modified.

The 250 SX-F debuts a new engine: a 249.9 cc DOHC single with an oval throttle body, top-feed injection, new valve timing, a 15.5:1 compression ratio and a rev limiter at 14,500 rpm. KTM bills it as the most powerful production 250 four-stroke, without giving the figure. The 450 SX-F keeps the revised engine and claims 46.9 kW (63.8 hp) at 10,000 rpm and 52 Nm at 7,000 rpm.

Item450 SX-F FE250 SX-F FE
Power46.9 kW (63.8 hp) at 10,000 rpmnot published
Torque52 Nm at 7,000 rpmnot published
Weight without fuel105.6 kg103 kg
Price in Italy€13,390 (press only)€12,690 (press only)

The 450's weight is down from the 106.4 kg of the 2026 Factory Edition.

02Rivals and context

Husqvarna's equivalents, the FC 250 and FC 450 Factory Edition, were presented almost at the same time with a similar technical base. In the motocross class, the 2027 version of these Factory bikes is really the 2028 brought forward a year, according to the show coverage.

03What we still don't know

  • Price in Spain: we haven't found it. The €13,390 and €12,690 are the Italian ones according to Motorcycles.News; KTM publishes no prices in its release and we haven't found an official Italian price list, so take them with a pinch of salt until there is official information.
  • Power of the 250: KTM gives no figure, although on its data sheet it calls it the most powerful production 250 cc four-stroke engine on the market.
  • Arrival: KTM says they can already be ordered in international markets and that availability varies by country; its regional press room speaks of December in North America and February 2027 in Australia and New Zealand. The "November 2026" date that Motorcycles.News cited is not confirmed by KTM.

04More from KTM at EICMA 2026

Email alerts

We will alert you about this section

We will alert you about all sections Change

Sections

Turn on notifications

The day before, the time of every session and where to watch it.