Skip to content
We Are Motor
News November 6, 2026 3 min read

Husqvarna FC 250 and FC 450 Factory Edition 2027: new engine, new frame and 2028 models a year early

Husqvarna presents the 2027 FC Factory Edition at EICMA: the 250 with a new DOHC engine, new chassis and closed-cartridge WP XACT fork, in a limited series.

Husqvarna FC Factory Edition 2027 blanca y azul sobre un caballete en una pista de motocross con montañas

Written by Andrés Rendón

Founder and host of Somos Motor, November 6, 2026

Husqvarna Mobility has presented the FC 250 and FC 450 Factory Edition 2027 at EICMA 2026, two limited-series motocross bikes. According to Racer X, they are essentially 2028 models launched a year early. Dirt Bike Magazine adds that they are expected to be the standard 2028 FCs.

01What changes

The FC 250 debuts a 250 cc double-overhead-camshaft (DOHC) engine with a new architecture, more compression and a higher rev limiter, with an oval intake body and port and a precision-machined combustion chamber. More peak power is expected, but Husqvarna gives no figure. The FC 450 gets a deep revision, mainly in the top end of the engine and the intake.

Both have top-feed injection, new engine management and exhausts with resonance chambers in the header. The chassis is new, with redefined stiffness and a glossy white finish; the engines sit slightly higher in the frame to improve anti-squat behaviour, that is, so the rear wheel does not sink under acceleration. They have a WP XACT closed-cartridge spring fork, a WP XACT shock with a new linkage, WP PRO wheels, Dunlop Geomax MX34 tyres, a wavy floating front disc, a Rekluse clutch cover and Team Husqvarna graphics.

SpecFC 250 FEFC 450 FE
EngineNew 250 cc DOHC450 cc with revised head
Price in Italy€12,790 according to Due Ruote, not confirmed by the brandnot confirmed in the sources consulted
Powernot publishednot published
Weight without fuel103.3 kg according to the official spec sheetnot published

02Rivals and context

Its equivalents in the group are the KTM 250 SX-F and 450 SX-F Factory Edition, with which they share a technical base; the KTM 450 declares 63.8 hp and 105.6 kg (official KTM figures). Husqvarna has not published equivalent figures. Outside the group, the logic of launching in 2027 what will be standard in 2028 is the same one KTM uses.

03Other Husqvarna news in Milan

The 2027 Norden 901 changes only in colour: a metallic blue. It keeps the 889 cc twin with 77 kW (105 hp) and 100 Nm, adjustable WP APEX suspension, tubeless spoked wheels of 21 and 18 inches and a 19-litre tank. There is no 2027 price.

04What we still don't know

  • Power and weight of the two FCs, and the price of the FC 450.
  • Price and arrival for Spain: there is no official price or date from Husqvarna. Due Ruote talks of limited sales from December 2026 and €12,790 for the FC 250 in Italy, and the Australian press of February 2027 in Australia. These are press data that should be taken with a pinch of salt until we have official information from Husqvarna.

05More from Husqvarna at EICMA 2026

06To get your bearings

Email alerts

We will alert you about this section

We will alert you about all sections Change

Sections

Turn on notifications

The day before, the time of every session and where to watch it.